[SEC] Lockette - Simple chest and door lock, no databases! [Moved to BukkitDev]

Discussion in 'Inactive/Unsupported Plugins' started by Acru, Feb 14, 2011.

  1. Offline

    Acru

    Lockette - The sign-based container and door lock for Bukkit! - by Acru Jovian

    ElgarL has been assigned as the current maintainer of this project, please forward any important issues to him as well. This post is abandoned, but proceed to BukkitDev for updates.

    Download it at BukkitDev! (Alternate) (JAR) (Source), also view the Change Log on BukkitDev.



    Supported external plugins:
    • Permissions - Permissions/Groups
    • GroupManager - Permissions/Groups
    • PermissionsBukkit - SuperPerms/Groups
    • PermissionsEx - SuperPerms/Groups
    • bPermissions- SuperPerms/Groups
    • Towny - Groups/Zones
    • SimpleClans - Groups
    • mcMMO - Groups (Disabled by default now, due to issues.)
    • Factions - Groups
    • LWC - Zones
    • Register - Economy
    Alternate languages included:
    Confirmed compatible plugins: ColorSign, SpeedSign.
    Conflicting plugins: ChestShop, Most sign editors!


    The active Lockette information page will commute to BukkitDev soon, but the forum thread is still the best place for discussion.



    Overview:

    The purpose of this plugin is to restrict access to the contents of chests, dispensers, furnaces, and doors without the use of a database to track containers.

    To use, simply place a signpost on the floor directly beside a chest or other container to be locked. Enter [Private] as the first line. Your own name will automatically be entered on line 2 as the chest owner. Optionally type in the full names of two other users allowed to access the chest's inventory on lines 3 and 4.

    When done correctly, the sign will automatically fix itself to the side the target chest, protecting it from unauthorized access! Only the chest's owner can then break the sign or chest. (Warning: Anyone with permission to use WorldEdit commands or similar can circumvent the protection by removing the sign.)

    [​IMG]

    Additionally, you can enter [Everyone] on lines 3 or 4 instead of a user name to allow everyone access to the contents of a private container, or [Operators] to allow ops access. If a Permissions plugin is available, you can use groups like [Moderator] or [Admins] or others as defined in the Permissions settings files.

    The owner of a container can add more users by placing additional signs beside the container with the heading [More Users], where lines 2-4 specify the names of the additional users. You can edit the users on previously placed signs by right clicking the sign, and using the command '/lockette <line number> <text>' to change it.


    Working with Doors:

    To protect a door, you can use the same method as protecting a container, the sign will attach to the door automatically. In addition, you can attach a [Private] wall sign to any side of the blocks just above or just below a door. For double doors only one side needs a sign. Door support is enabled by default in the config file.

    Once a door is protected it will only open for someone listed as a user, and will not respond to redstone power or switches unless [Everyone] is listed as a user. Iron doors which usually won't open from clicking will work just as wooden doors. In addition, double doors will open together automatically!

    You can also use [More Users] signs as with containers, with the caveat that the sign cannot be placed on the block above the door if the [Private] sign is not above the door as well! (This is done to prevent a security uncertainty issue.)

    Protected doors will be closed automatically if a timer is set. A timer can be set globally with a configuration option, or individually for each door by using the tag [Timer: #] on line 3 or 4 of the [Private] sign, where # is the number of seconds that the door should remain open. If the timer is set to 0, this means the door will never automatically close. If no timer is specified, protected doors will use a global timer set in the configuration file. If the server is shut down cleanly any open doors will be closed, but in the event of a server crash while a door is open, it may remain so. Note that the initial state of a door is assumed to be closed.

    Care must me taken to place protected doors on a stable block. Building a door on sand, gravel, leaves, TNT and et cetera are allowed by the plugin, but cannot be secured fully. :3 Additionally, it should be noted that most status messages still refer to locked blocks as containers, so for the purpose of simplicity, doors should be considered as a type of container.


    Features:
    • No passwords or databases needed!
    • Permission checks run in constant time, no matter how many protected containers.
      • One owner and up to 11 additional users supported. (17 for double chests!)
      • Allows access to [Everyone] while still protecting the container from vandalism.
      • Allows group names in conjunction with many other plugins.
    • Special powers for ops or admins, configurable with permissions.
      • Reports when an admin does something naughty.
    • Protects single and double chests, dispensers, and furnaces.
      • Explosion and block-break protection for the protected container and sign.
        • Option to protect all containers from explosions.
    • Full support for doors, both wooden and iron!
      • Double doors are handled automatically, with no redstone.
      • Doors can be set to close automatically, via a timer setting.
      • Redstone hacking is disabled for protected doors.
    • Prevents creation of chests larger than 2 blocks.
    • Informative or helpful messages when interacting with containers.
      • The first time a chest is placed, a help message will be shown.
      • Types of messages shown are configurable in settings.
      • Additional language support.

    Advanced Setup (Permissions) (open)

    Advanced Setup:
    There are a few things you can now customize in the configuration files for the plugin, found in the plugins/Lockette folder. After running the plugin for the first time, two files will be created, config.yml and strings.yml. The first holds the following settings:
    • enable-permissions - Allows the use of permission nodes to specify who can do what. If this is disabled, groups will still be used but admin status is taken from the ops file. Defaults to false.
    • enable-messages-* - Enables or disables groups of messages listed in the strings.yml file. Not counting the broadcast ones.
    • broadcast-*-target - Sets the group or player that specific broadcast messages should be sent to. This can be set to "" for no one.
    • explosion-protection-all - Enabling this extends explosion protection to all containers on the server, not just [Private] ones. Default is disabled.
    • allow-admin-bypass - Allows admins to go though any protected door. Default is true.
    • allow-admin-snoop - Allows admins to peek into chests owned by other people. Default is false, and this setting is recommended! A broadcast message will be sent each time an admin snoops in a protected container where the admin doesn't have permission to. The message will be sent to a player or group as specified in another option. Admins can still break protection on chests if this is disabled, however.
    • enable-protection-doors - Enables support for private doors, defaults to true.
    • default-door-timer - Sets the door closing timer for all protected doors on the server, unless overridden by a specific sign. Defaults to 0, which disables the door closing timer.
    In the strings.yml file, you can set alternate language tags for [Private] and such, in ANSI format. If you need characters not in ANSI then you might try UTF-8 format, though it seems bugged tight now. The default alternate tags are in French, but server ops are free to translate the whole file into the language of their choice. If you do this, please share it back to me~ :3 If you want to disable only a specific message, you can set it to "", the empty string. Admins can use the command '/lockette reload' after editing the configuration files, to reload them.

    If a Permissions plugin is not available or the enable-permissions option is set to false, Lockette will use the ops file to determine who are admins. Admins can break the protection on any chest, and look inside protected chests (only if the related option is set), as well as reload the plugins configuration files. All non-ops will be able to create protected containers for themselves.

    If a Permissions plugin is available and the enable-permissions option is set to true, the following nodes will be used instead of the ops file and are included by default in the '*' node:
    • lockette.user.create.* - Permission required to create a protected container or door. Possible sub-nodes include chest, dispenser, furnace, and door. (The permission lockette.create.all is still supported, but obsolete.)
    • lockette.admin.create.* - Allows admins to create containers and doors for other users. Possible sub-nodes include chest, dispenser, furnace, and door. Leave line 2 blank for the default behavior or enter the name of your choice. Capitalization matters.
    • lockette.admin.break - Allows breaking protection on containers.
    • lockette.admin.bypass - Allows opening of any locked door.
    • lockette.admin.snoop - Allows peeking in protected containers. (The setting allow-admin-snoop must be true.)
    • lockette.admin.reload - Allows use of the reload command.

    Technical Information (open)

    Technical Information:

    This plugin has been tested and shown to be working for many builds of CraftBucket though a number of the more recent builds had a serious issue, so I'm suggesting a minimum build of 561 now. If you update past what is listed in the post's title and the plugin seems to break, it is probably not my fault. Post a note anyway and I'll see about fixing. I'll try and keep up with the new recommended build system, but for latest builds that break things, you should expect some time to pass before I take care of the issue, as this plugin is now mature. :3

    If there are multiple containers by the placed sign, the plugin will use the NESW rule to choose the first container that is not yet private. To elaborate, the plugin will check to the north of the sign first, and if no container or door is available to the north, it will continue checking clockwise around the sign.

    Due to the current implementation of the explosion event, this plugin will cancel all explosions that would damage the container or sign, rather than just remove the container and sign from the blocks to be damaged. Canceled explosions still knock signs off the walls. Canceled explosions leave signs looking blank, but this is just a graphic glitch, reconnect to fix.

    Bonus: This plugin will prevent chests bigger than 2 blocks from being created via glitches. (Again, this could be circumvented using WorldEdit commands, so take care who has access to such a plugin.)

    This plugin was inspired by the old hmod plugins Lock by Roman "kingseta" Pramberger and ChestCapsule by Fernando "Fergo".

    Hooking into Lockette (open)

    Hooking into Lockette:

    If you are a plugin author and want to connect to Lockette, you can use a public static function to get information about the protected status of a block.

    More info later, perhaps, but if you need the details now then go poke through the source~

    Future Possibilities:

    There are a number of things that have been suggested, and they tend to be added to the list below if I think they might be a good idea. However, some sort of locked container limit is requested often but this is not possible without a database to track the number of locked containers someone has. All things considered, this will not be supported. On the up side, without a database you can have literally millions of locked containers without any sort of lag, and there are permissions to restrict who can create locked chests. Perhaps only allow Moderators to create locked chests for other users, if you don't want to allow infinite locked chests.

    Aside what has already been implemented, the following may or may not appear in future versions:
    • Furnace/dispenser clusters, protected by a single sign.
    • [Log] sign to list recent users of a container or door.
    • iConomy fee for protecting containers/doors.
    • Worldguard connection.
    • [Protected] tag for viewing only.
    • Specific time range that doors can be opened.
    • DataLog plugin support.
    • More types of protected blocks, such as brewing stands.
    If you want any of the above features sooner than never, let me know! However, I currently see Lockette as functionally complete, for the most part, in that it already has all the functionality it needs. Future updates will mostly be to account for changes in Minecraft and Bukkit.


    Final Note:

    Please leave a reply if there are any bugs or suggestions, and if you like this plugin you can click the like button at the bottom of this post~ Thanks to those few that have donated! [​IMG]
     
  2. Offline

    xZise

    Lockette didn't use the permissions file. I checked this with Permissions and this says: User hasn't the permission.
    Nevermind, didn't set it up in the configuration.

    Fabian
     
  3. Offline

    Flatliner

    Just wondering. Is it possible to specify multiple groups to broadcast too when someone snoops? I don't want to broadcast to everyone when it happens but I'd like to be able to notify 2 groups.
     
  4. Offline

    Maxis010

    The easiest way to do this is to create a group, give it no permissions what so ever and stick anyone that can receive the broadcast in there, then set that group as the broadcast target
     
  5. Offline

    im the best

    hi when i click on lockette wons its downloaded it comes up with a error
     
  6. You don't open plugins, you drag them into your plugin folder. Look for a tutorial (bit busy atm or i'd post one).
     
  7. Offline

    xZise

    @im the best: Could you tell us what your error is?

    Fabian
     
  8. Offline

    NVX

    Running Lockette 1.3.8 with Permissions 3.1.5 on CB 863 (for the multiworld fix), protecting doors and allowing groups other than Everyone doesn't appear to work, example:

    [Private]
    NVX
    [Shop]

    Doesn't allow members of the group named Shop access to the door. I have tried enabling permissions in the Lockette config file, but from what I could gather that only affects giving permissions and groups are read regardless?
     
  9. Offline

    Maxis010

    Check that permissions isn't the problem as there has been a lot of trouble with Global files, if you are certain that people are in the shop group and Lockette isn't accepting that can you try something for me
    If people are part of Shop and another group see if Shop is the first listed, I'm going to do a test on my end now
    EDIT: Nope, MultiGroup doesn't change a thing
     
  10. Offline

    Chasingu

    Now, the signs can't be destroyed correct? So, destroying the sign wouldn't give access to the chest right? Or can they?
     
  11. Offline

    Maxis010

    No they can not, else that would invalidate the whole purpose of this plugin
     
  12. Offline

    NVX

    Ok, changed from Global to world-specific permissions (and took advantage of the permissions3 permissions cloning thingie for multiworld) and that fixed it. Cheers for the help even though it wasn't a Lockette problem after all :)
     
  13. Offline

    Kane

  14. Offline

    VeryInsane

    This is great! I really hope:
    • iConomy fee for protecting containers/doors.
    Is at the top of your list ;)
     
  15. When ever one of my users or myself try to make a new [private] sign it tells me: A internal error has ocurred. It worked before, whats wrong now?
     
  16. Offline

    bularax

    How can i make the chests so everyone can open them?
     
  17. Offline

    Maxis010

    [Lockette]
    yourname
    [Everyone]
     
  18. Offline

    bularax

    Didn't work for me. I did
    [Lockette]
    Bularax
    [Everyone]
     
  19. Offline

    EpicATrain

    [Private]

    [Everyone]

    Can somebody submit a code or feature or SOMETHING that has an additional line for a FORCE close doors every X seconds or minutes. Every double door on my server has one door open and one door closed. OR maybe a command I can type such as /lockette close all that will ensure every door is closed on the server? Or maybe per world?

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
     
    Last edited by a moderator: Jul 18, 2016
  20. Offline

    bularax

    It doesnt even work when i delete the sign. I can't open the chest when i deop myself.
     
  21. Offline

    Maxis010

    Doors should auto close after a few seconds as set in your config
    The half open half closed must be from another plugin conflicting with Lockette as Lockette will cause both doors to open and close together if they are signed
    That command is impossible as it would require a database or some very intensive block checking
     
  22. Offline

    EpicATrain

    should it not be simple? Shouldn't all doors have an open and close state? I would think it would be simple to have the server search every block and set doors to close
     
  23. Offline

    Maxis010

    That is just it, doors don't have an open/closed state, Lockette assumes when a sign is placed the doors are closed
    And as for doing a global search...
    Each chunk is 16 x 16 x 128 blocks, that is 32,768 blocks to check to see if it's a door
    Now consider how you load a minimum 441 chunks loaded, that makes 14,450,688 blocks to check
    Now imagine you moved 1 chunk over and the server generates another 20 chunks to account for that now you have 15,106,048 blocks to check
    Now go 10 chunks in every direction from spawn, now you are looking at checking over 60 million blocks to see if they are doors
    Now put 10 people on the server and let them explore, now you are in the billions
    Simple, yes, efficient, not a chance
     
  24. Offline

    WeesoftVideo

  25. Offline

    Meapa

  26. Offline

    Ragor

    please create locks for trapdoors!
     
    AS1LV3RN1NJA likes this.
  27. Offline

    xZise

    Hello,
    is it possible, to disable the message, which appears, when somebody places a chest and tells him, that the user could use [Private]?

    Fabian
     
  28. Offline

    zawmbee42

    I gave one of my ranks called Elite the bypass node, but they are unable to bypass...
    Here's the permissions:
    Elite:
    default: false
    permissions:
    - essentials.unban
    - essentials.broadcast
    - vanish.dont.hide
    - worldedit.navigation.thru
    - lockette.admin.bypass
    - worldedit.drain
    - essentials.time
    - essentials.weather
    inheritance:
    - moderator
    info:
    prefix: '&0[&5Elite&0] &8'
    build: true
    suffix: '&6'
    rank: 3
     
  29. Offline

    EssentialsTeam

    This plugin breaks GroupManager commands, because it calls pluginmanager.enablePlugin(groupmanager) inside their own onEnable().
     
  30. Offline

    lazy_architect

    Just did a fast test with RB928 everything looks to work great.
     
  31. Offline

    VeryInsane

    Will this work with Newest Recommended Build #928?
     

Share This Page